Burgard a arm help

[Blaster crazy]

Hey getting a set of Burgard a arms that I will be puting on 2002 spindles but I hear this will require reaming spindles. The seller has the exact same spindles as me and he said that he didn't need to get his reamed here's a pic of his too. So will I need to ream them.

 

[Awk08]

if you have the top pinch bolt like that does, you will not need to ream them
I thought it was banshee spindles that need reamed, maybe 03+ blaster spindles ?
but definately not stock 02 original cable brake spindles.

 

[Blaster crazy]

Alright thanks a lot awk

 

[DUALSTROKE]

Those are the wrong spindles for burgard a-arms. Burgard requires a banshee spindle that needs to be reamed. A stock blaster pinch bolt style ball joint does not have a bottom nut. Looks like he just took those tapered ball joints and installed them in a non tapered hole. Used the nut to hold them in and tightened the pinch bolt to close the pinch slot. I would not personally run them like that and I wouldn't be surprised if the taper was a bit chewed up from being in the wrong spindle. To top it off you will not be able to run the front drum brakes with banshee spindles. The good news is that the banshee spindles have mounts for hydraulic calipers. You will need banshee hubs to mount rotors. So converting to hydraulic front brakes will be a bolt on upgrade. Add a complete banshee front brake system to your order when ordering spindles. You will need banshee hubs, calipers, rotors, lines, front master cylinder in order to convert.

 

[Fast6hand]

Blaster 03-06 hubs do fit on the banshee spindle. I was running them together with my ASR arms. Just make sure, I believe, to get 91 and up banshee spindles. The previous years were j-arm and won't work.

 

[DUALSTROKE]

Blaster 03-06 hubs do fit on the banshee spindle. I was running them together with my ASR arms. Just make sure, I believe, to get 91 and up banshee spindles. The previous years were j-arm and won't work.

Blaster 03-06 hubs are exact same as banshee. They were designed as a banshee/warrior hub till they used them on blasters in 03. fwiw Warrior hubs work also.

 

[Blaster crazy]

Wow this sucks but the plus is hydros

 

[Fast6hand]

Wow this sucks but the plus is hydros

Banshee hydro stuff is easy to find and pretty cheap. Its easier to find then blaster hydro.

 

[Blaster crazy]

Also where Should I go to get spindles reamed

 

[DUALSTROKE]

Snap on sells a reamer. part #r121 Or find a local machine shop

 

[Blaster crazy]

Thanks