Does anyone know if an adjustable or Tune-able CDI is available for the blaster?
If not, I think I should create one. I've already done extensive research and began reproduction of the Tecate 3 CDI (first to be produced in 30 years!). I've began creating the schematic for the Tecate to allow for some adjustments and tuning. Then it came to me... My favorite quad doesn't have any CDI adjustments, only a crappy ignition curve!
In the past, we've used the hotshot CDI and adjusted timing 4 degrees, but that can only do so much.
Would anyone be interested in a tune-able/adjustable blaster CDI?
Below is an example of a couple of my prototype CDIs that have a way more aggressive timing curve. They are 2-3 times the size of the OEM blaster CDI. These are my Tecate 3 CDIs. Due to demand on a 32 year old machine, I opted to use a 3d printed housing opposed to a molded one.
Let me know your thoughts, comments, and suggestions below.
If not, I think I should create one. I've already done extensive research and began reproduction of the Tecate 3 CDI (first to be produced in 30 years!). I've began creating the schematic for the Tecate to allow for some adjustments and tuning. Then it came to me... My favorite quad doesn't have any CDI adjustments, only a crappy ignition curve!
In the past, we've used the hotshot CDI and adjusted timing 4 degrees, but that can only do so much.
Would anyone be interested in a tune-able/adjustable blaster CDI?
Below is an example of a couple of my prototype CDIs that have a way more aggressive timing curve. They are 2-3 times the size of the OEM blaster CDI. These are my Tecate 3 CDIs. Due to demand on a 32 year old machine, I opted to use a 3d printed housing opposed to a molded one.
Let me know your thoughts, comments, and suggestions below.