I just replaced the bottom end on my blaster and broke off the bolt that goes into the spring and stopper lever on the end of shift assy. Any ideas on how to get it out, I’m beyond frustrated
Broken bolt in crankcase
- Thread starter Spencer Evans
- Start date
I would clean the area with brake cleaner, cover the oil hole under shidt star, mask off star, and shaft above. Gently hear it and spray with PB Blaster several rimes and use an easy out or left hand drill bit. Clean ALL chips out.
I ended up getting the remainder of the bolt out but the threads are bad, hopefully a shop doesn’t charge too much to tap it because Im trying to save this case
