Boysen vs v force

boysen all the way get the power reeds with the rad valve notice a huge diffrence their great
 
get both or just the rad valve for more diffrence but the reeds are good to any mod like that is good but go with both you have an older blaster anyway ad could use some new ones
 
Vforce are way better, they produce more power more torque. Make sure to get Vforce 3's and not the delta 2's
 
the delta 2's are the old style the 3's are the more updated verison
 
i just bought the deltas for 50 on ebay.
and they look perfect.
theyll get the job done. lol
 
they will any aftermarket reed is a huge difference over stock.
 
you also run a less risk of getting a cracked reed because the stock (OEM) reeds are a glass type reed and crack much easier than the aftermarket carbonfiber reeds which can bend without cracking and they don't warp nearly as much either. and as posted above they give you a better powerband, and better throttle response and other sh*t like that
 
when i ran my blaster motor i did the cheap way cause i broke a reed an bought boyssen about 10 riding hours later my motor seized an when i pulled it apart the boyssen reeds were shot.
 
I just bought a 01 blaster i am thinking about getting v force power reeds but if i get the reeds should i get the reed spacers why?