has anybody ever had their chain double wrap around the front sprocket?
if so got any ideas for getting it loose
if so got any ideas for getting it loose
bound up chain
- Thread starter 98blaster+4
- Start date
wow that sounds harsh my brothers dirt bike did same thing.can you pull the sprocket out or is it to bunched up.maybe put it in nutral grab the chain see if you can't loosen it with something.
well theres no easy fix
so i busted out the die grinder
didnt like that chain anyways, guess i need a new one
when i get a new chain do i need to get new sprockets also?
so i busted out the die grinder
didnt like that chain anyways, guess i need a new one
when i get a new chain do i need to get new sprockets also?
I always suggest to change sprockets when you change your chain! I'm pretty sure it's not that expensive to buy so while your at it just change it!
Yeah I had the same problem with my chain, I used a flat screw drive to undo it and then you need to tighten your chain, It did it like 3 tiems to me before I actually tighten the chain and now it works fine, it's just worn now so I need to change it.
oh plzz that happend to me easy im pretty sure u took the cover off rite well if not take it off put the bike in neautral and pull it back easy as that or atleast that worked with mine
yeah tried pulling, hammering, prybar, tapping,etc.
that chain was destined to go under the grinder
that chain was destined to go under the grinder
thats happend to me 3 or 4 times. i could always hammer it down with a flat head and a sledge. but ya always change your sprokets when you get a new chain and vice virsa
My cousins yfz did that same thing no teeth broke but make sure you check the back of the sprocket because the back of the front one was scored pretty bad and for the extra bit of money probably would be good to be safe
Similar threads
