Tors is deleted, brand new Boysen reeds and I put a new ngk in it right after I had the carb as close as I could get it without plug chopping. Still ran the same no matter what I changed.
Blaster Runs Odd
- Thread starter CodyEStanford
- Start date
Tors is deleted, brand new Boysen reeds and I put a new ngk in it right after I had the carb as close as I could get it without plug chopping. Still ran the same no matter what I changed.
Leak testers are 30 dollars. Or you can make your own. Not sure what you're looking at that is 200, you're not buying a leakdown tester.
you're not looking in the right place
http://www.blasterforum.com/threads/leakdown-testers.55015/
I have 2 versions of leakdown testers available, all come with the exhaust block off plug and available for stock 26mm - 28mm carbs,
or 34-36mm carbs.
1. the original with tire valve and exhaust plug, you supply a bicycle hand pump to pressurize to 7 psi. max. for $35 shipped.
(both 26 and 34mm sizes shown)
or
2. the new version with a blood pressure bulb for pressurizing and exhaust plug for $40 shipped
but......just sold the last 2 on wednesday last week, ordered more parts thursday and exhaust plugs have already arrived, gauges and pressure bulbs should be here by midweek at the latest
I'll keep that in mind lol, but I took my stator cover off and before I could even take the stator and flywheel out to check the crank seals I found that the crank bearings and lower rod bearings are shot. Will that produce the symptoms I'm describing above?you're not looking in the right place
http://www.blasterforum.com/threads/leakdown-testers.55015/
I have 2 versions of leakdown testers available, all come with the exhaust block off plug and available for stock 26mm - 28mm carbs,
or 34-36mm carbs.
1. the original with tire valve and exhaust plug, you supply a bicycle hand pump to pressurize to 7 psi. max. for $35 shipped.
(both 26 and 34mm sizes shown)
or
2. the new version with a blood pressure bulb for pressurizing and exhaust plug for $40 shipped
but......just sold the last 2 on wednesday last week, ordered more parts thursday and exhaust plugs have already arrived, gauges and pressure bulbs should be here by midweek at the latest
