Blaster parts (frame, suspension, etc)

[phive70]

Have the following for sale:

Frame and comes with: 2 handle bars (stock steel and a/m aluminum), front bumper,controls, front fenders (one is cracked), stock foot pegs. Frame isn't bent, but the front fender supports are cracked/welded. The ball joints are bad.

$80.

Pick up only.

No title.

------------------------------------------------------------
Front brakes/spindles/a-arms/shocks/wheels.

The drum brakes worked when removed, but the shoes will need to be replaced. The tires have lots of plugs and hold air for about 5 hours. The shocks aren't pictured, but included, they're stock, with lots of red over spray. The one upper a-arm is bent slightly and it just rubs the spring on the shock.

Each side is $45. Shipping not included.

------------------------------------------------------------

brake cable, worked fine when mounted, the outer shielding has been rubbed away in some spots.

$5. Shipping not included.

------------------------------------------------------------

Stock swing arm with shock. Originally silver, but now has some red covering it.

$5. shipping not included.

I also have an axle (both hubs, sprocket, brake disc, and center hub).

------------------------------------------------------------

wiring harness (looks like the oil light plug has been cut). Comes with: coil, cdi, and tors.

$5. shipping not included.

 

[Blasterb0y794]

How much for the key? Ill take it right now.

 

[1995blaster]

how much for both foot pegs? and the handle bar mounts pm me the price

 

[phive70]

Bump. update: I have the following on craigslist too but no one has showed up with $.

The following is for sale, its a package deal. You buy whats left of the blaster for $150, you get a bottom end. You buy the bottom end for $150, you get whats left of the blaster.

Frame comes with: 2 handle bars (stock steel and a/m aluminum), front bumper,controls, front fenders (one is cracked), stock foot pegs. Frame isn't bent, but the front fender supports are cracked/welded. The ball joints are bad.

Front brakes/spindles/a-arms/shocks/wheels.

The drum brakes worked when removed, but the shoes will need to be replaced. The tires have lots of plugs and hold air for about 5 hours. The shocks aren't pictured, but included, they're stock, with lots of red over spray. The one upper a-arm is bent slightly and it just rubs the spring on the shock. I'm pretty sure I have front brake cables for it (all 3).

Stock swing arm with shock. Originally silver, but now has some red covering it.

I also have an axle (both hubs, sprocket, brake disc, and center hub).

No rear brake caliper.

Pick up only.

Cash only.

No title.

This is the bottom end that I'm talking about.

Yamaha Blaster bottom end. Not sure what year. I was told from the person whom I purchased it from it was rebuilt. All I know is I haven't put any hours on it at all and the connecting rod isn't stock (Hot Rods C K 144). On the clutch side it is missing some gears and everything isn't torqued down. As far as I know the gear set is complete. The red oil on the crank is marvel mystery oil. Crank spins free. No drain plug. I don't really want to ship this. I'm at zip 17970 (St.Clair, Pa) close to I-81 (exit 124) and about 25min north of I-78.

$150.

 

[phive70]