Blaster No Spark ! HELP

[liljhall09]

Well my buddy at school has a built blaster that had a crack in the cylinder. We got the crack fixed and put everything back together, quad started and was cutting out a little. so we bumped his jet down and it ran better, just as i began to take off the bike stalled and wouldnt start back up. Took a spark test and it has nothing, Checked all the wires , checked cdi and coil. Wondering if it has anything to do with the stator ? or if the coil is bad ? Anyone have any suggestions ?


Thanks - J.Hall #22

 

[Mrbrocco]

did you check the Ignition coil? it could be the stator.. i dont know what wires you check but that happened to me only when i killed it via kill switch the stator went haha. I replaced the boot, the ignition coil and stator and that fixed it but just try diff things

 

[liljhall09]

well we took the flywheel off to check the stator , and the stator looked bad , so were gonna replace it and try a new one

 

[mattsdad]

How do you check the cdi? Thanks