blaster engine rebuild

[blasterkiidirl]

i have decided to modify my blaster 05 i'm going to get ported and get the head milled and going to put v force 3 reeds and a full toomey b1 exhaust and a bit more small things like oil injection block off but but do i need to do any thing to the bottom end and can i just use heavy duty clutch springs or do i have get a hole clutch kit

 

[Surfrjag]

Depends on the condition of your clutch. I would probobly just get a kit though.

 

[sheeblast]

i would check the bottom end to make sure it is good.
and as surf said, check the fibers and steels. make sure they are good. if they are get a new clutch gasket and HD springs. if they are somewhat worn down, get the kit. you can get a tuck HD kit for around $50-$60.

 

[Blaner]

bottom end will handle the power granted its in good condition