Blaster clutch was installed wrong

[SR-powered-240]

Alright I was putting my engine together last night and as I was doing the new clutch the same way the old one came out my buddy said that something didn't look right.

They had the boss spring thingy and the larger diamater disk as the last disk. After researching I found that it goes as the second disk. What kind of problems should/would I have noticed with the boss spring and disk as the last disk?

When I first got the blaster the clutch was already like that and I don't remeber the clutch feeling weird other then it was worn pretty low.

 

[blaster99]

ok if it is a stock clutch,it goes like this ,there should be 7 friction plates 1 being smaller then the rest,and 6 clutch plates,it goes friction ,then clutch.but remember to put the clutch plates at 60 degree intervals.first regular size friction plate, then clutch plate ,then the cushion spring,then smaller friction plate(to fit around cushion spring),and so on with the rest.

 

[6mmedic]

What do you mean by 60 degree intervals? The steel discs that have the hump on it?

 

[blaster99]

yes the clutch plates start with it pointing up and then the next one 60 degrees to the right and so on.

 

[SR-powered-240]

Ok yeah thats what I did after reading about it. I was wondering what problems would arise from the smaller one being in the last spot instead of the second spots like its supposed to be.