Blaster carb

[Mynamesrick]

well i just went through and cleaned my carb and i got everything put on there, put it on, turned on the gas, and gas started going through the tubes on the sides and bottom of the carb.

can anybody help me out here?
thanks

 

[piezzi]

Your floats are sticking, which is a comon issue upon carb reassembly. Just start your bike and they'll likely become unstuck. You can also tap on the bowl to get them to release. If neither works, then remove the carb, loosen the bowl screws and move the bowl around a little until you hear the floats moving when you tilt the carb back and forth.

 

[Mynamesrick]

well i just searched it and it said it was a stuck float.

 

[Mynamesrick]

ok thanks for the help. ill give it a try

 

[90 blaster]

tap the bowl of the carb with the handle of a screw driver.Thats what i do when my float sticks.