blaster brake hub vs. 2003+ hub

[Unstock240]

Just ordered a banshee axle for my 2000 blaster. I am only swapping the axle. I know the banshee/03+ brake hub is solid mount, and the blaster cable hub floats. Are the spline sizes the same for the 2 diff hubs? The only diff I see is the banshee axle has no spot for the cable hub dust boot clips?

 

[Unstock240]

Nevermind I see that the banshee axle tightens down against the brake hub, and the blaster doesn't. So I will need a banshee brake hub maybe I can get away without it floating.

 

[bfear]

welll i used an older model blaster axle on my 2003 blaster and the olny thing i had to do was use an older model brake hub and make little spacers that go inbetween the caliper and the carrier so the caliper sat even with the rotor. it works good. I don't think this has anything to do with what you are doing, cuz i think you are going from newer to older and i went from older to newer.

 

[Unstock240]

I will have to make it solid for the axle to be tight. I think it will be okay as long as my caliper is adjusted spot on.

 

[245stroker]

you'll need the banshee axle and the banshee brake hub. All of your other blaster parts will work

 

[Unstock240]

Ordered the brake hub, if my caliper wont work guess I'll have to save until i get a rear hydro.