I got a line on a complete 660R Transplant , Its gonna be tight , BUT the price is right , I want to get a spare frame to install it into , then swap over my suspension and what not . Tell me what You guys think .
Blaster 660R
- Thread starter DirtDiggler
- Start date
Tall yes I'm gonna actually remove the fuel tank and just have the cover for aesthetics . Then make a aluminum pan that is mounted under the seat that runs back to the end of the frame , and use that to mount a jaz 3 gallon fuel cell the ecm and battery .
Nothin wrong with wheelies if you ask me , but I do have a +4 swingarm on it now.
Nothin wrong with wheelies if you ask me , but I do have a +4 swingarm on it now.
WOW you could mount the air filter under the tank cover above the motor and make like a ram air from the hood.
A +4 would help out alot, I've riden quite a few raptors and they two wheeled easily. It seems like it would be a real biotch to get everything mounted, assuming the engine isn't too tall. And there is the issue with the gas tank. But if you go through with it, that would be badass.
TBH, I think you should stick with a 2-stroker of some type. To me its kinda a slap in the face to hear about a 4-stroke blaster hybrid thing.
you show me a raptor that is the same speed as a stock blaster and ill show you somebody that cant ride
Thanks for the input guys and uh yeah whatever on the raptor as slow as a stock blaster thing I guess the medication wasn't working for that person right then update is this lookin at buying a frame off a forum member late this month then keep hunting down the right transplant I got beat out of the original one that got this all started I'm looking for a 01 to 05 660 complete engine with carbs and all I figure a budget of 2000 will git it done so still hunting down parts I'll keep it updated
I like your idea for the fuel tank. The 660/700 is a TALL motor, you'll need to poke it way up between the frame rails. Should be awesome.
good luck, even know there tall i think thats the least of ur worries. the botom end on those thing are massive. i guess its just a huge ass all around motor lol.
Good luck man!
Heres someone else who attemed the same thing but never finished it.
http://www.blasterforum.com/pics-vids-9/starts-blaptor-build-15998/
Heres someone else who attemed the same thing but never finished it.
http://www.blasterforum.com/pics-vids-9/starts-blaptor-build-15998/
thanks for posting that , that really helps , now I know for sure the engine/trans fit in the stock frame without cutting the downtubes . When I get a frame ( within the month ) I'll get some flat stock and make gussets with the plasma cutter and have those ready. I'm on the hunt for a 01-05 660 , gotta find the right deal , the original one fell through , so I'm keeping my eyes open
Similar threads
