Black wire coming from the flywheel

[twosmoke]

What does it connect to? I was trying to clean up and get rid of unwanted wires after removing my TORS and now I've found myself with a mess of cut wires that I don't know where to put. Schematics don't help me much as I don't know much about electricity but does anyone know what this wire connects to, and, any other information about removing unused wires after tors removal? Thanks in advance

 

[J4M1E333]

hi, cant help much with the tors removal as mine was done when i got it but the black wire is an earth, although only if it is solid black, if it has a white strip through it, it is part of the kill system and there are a few other black cables with strips but im not sure what they are

 

[kylepotatoes]

Like J4M1E333 said if it's pure black, it's a ground

 

[twosmoke]

Thanks guys, really helped me out a lot. I'm gonna try to ground it and see if I get a spark.

 

[J4M1E333]

wont effect spark mate, its more magneto, for developing voltage for lights Etc, tell me what you have where and i will try and help you i did mine today, as the person before me had trashed the wiring system, so could give you some tips....

 

[twosmoke]

I'm gonna go get a clymer manual, really didn't want to spend the money, I hope the manual lists the wiring in plain english. If not I'll post pics up here, thanks.

 

[gearhead04]

clymer manual has the diagrams your looking for. They are well worth the $40

 

[twosmoke]

^^Just picked one up, nice diagrams for sure. Your blaster has the same color scheme on the cover

 

[twosmoke]

Ok, I got a manual and hooked up the wires best I could. No luck, so I pulled the flywheel off and checked it out. My question is, will I be able to feel obvious magnetic pull between the stator coils and the flywheel? I feel nothing, I think I might have ruined the flywheel.. When I initially disassembled it the plates inside the flywheel rotor were all corroded and rusted so I used a grey wheel to polish them. Anyone think this is my problem?