Hello All. Just wondering if anyone here may have any good suggestins for me. I hit something pretty hard with the blaster last weekend and it looks like I twisted some stuff up. I think it was a tree stump I hit with front left wheel. I bent the rim and Tie rod so I replaced them both and something still wasnt right. Looking straight down on front end It seems lower control arm is tucked further back on left side than right ... so I replaced the control arm. No difference yet. If you stand the bike on its back and your looking at its belly you can see the frame rails curved to the left. It looks like they go crooked right where the rails come close together in the front just a few degrees. If you put a level across the front wheels as the bike is up one wheel is 1 1/2 inches lower than the other. So as I drive, one wheel is that much ahead of the other .Has anyone had a similiar problem and maybe know a good way to straighten the frame. I hoped I wouldnt have to tear the bike down to bare frame if I can think of a safe way to tweak it back. any advice is greatly appreciated
