Bare Bones wiring harness

I'm using my tether as a on/off switch to eliminate the key and as a kill switch also, two birds one stone. And the long wire on the tether goes to the black wire with the white tracer, the short is your ground. Using a toggle for the headlight, I believe one of the guys cut the yellow wire with red tracer and put each side of the wire on the toggle.
 
Would've had pics up of the toggle but could'nt remember where I put it. I think I gotta pretty cool place to mount it. So I ended up gutting the harness. Man what a cake walk. Thought it would be a hassle, got it done in 20 mins. Just gotta wrap it all up with blueshrink tube and blue electrical tape. Everything's gotta match LOL.
 
I need to get some updated pictures up of mine, i would consider it an almost complete wire tuck. I only run a tether so the bars as clean as possible, gunna use the stock key on/off that fits into the 03 style plastic for my headlight low/high i think when i get around to finding the switch. I need to build another one cause now that i finished this one i realized all the stuff i wish i would have done before powder coating, like holes in frame for wires