banshee spindles

[fmxr47]

so for all of you out there that have the banshee spindles and brakes, how did you install the upper ball joints, because the lowers are the same as the uppers on banshees in terms of how tey install, my upper ball joints inly work for the pinch bolt type, so where do i get the new upper ball joints, im running sms +5+1 a arms

 

[DUALSTROKE]

Go to the local parts store.You need to get new vehicle tie rod ends.I believe they are chevy truck standard tie rods.Just find one that is the same thread then you need to ream the banshee spindles.Burgard uses these on there arms and you may be able to purcahase from them.

 

[fmxr47]

well i got the brakes all hooked up and primed and they feel great, but i still need to drill out the pindle and drill a hole through the side for the locking

 

[militaryblaster]

Here is a link for a how to on converting drums to hydros

http://www.exriders.com/vbb/showthread.php?s=&threadid=283464