banshee rear brakes?
- Thread starter 02blueblaster
- Start date
you need the brake setup and a brake hub off a banshee a mounting kit or newer blaster carrier and the right side peg an pedal off a newer blaster
You will need to weld tabs for the master cylinder and resorvoir.Extend the brake pedal with steel and weld it.You need an 03 and up carrier to mount the caliper or cut the brake boss off of a shee carrier and weld it on.Thats about it.That will work with stock setup.
well, i have a deal on a banshee rear brake kit, for 100$..caliper, MC, pedal. ..for 100$ so i would still need a carrier
i got a almost flawless 04 carrier for $40 off ebay check around there you might find a good deal
the 03 and up carrier is ready to mount the caliper up.The stock carrier will work but you will need to weld a bracket on.I cut the brake boss off of a shee carrier and welded it on the blaster carrier.Looks real nice.All depends on what you have for tools and money.
The shee pedal will not work.I just welded some more material onto the blaster pedal(basically traced the rear of the shee's pedal).Or you can get 03 and up foot pegs and brake pedal.The tri-z pedal is new to me but if it works it will be the easiest.Good looking out Foolish.
i just ordered a hole rear brake set up off a banshee.. i have welders and sh*t.. but ill take pics and what not.... i should get the brake set up next week and probable all fabbed up the week after.ill keep you posted.
i got my banshee rear brake setup yesterday... started working on it today not done but im shot.. heres some pics of what i did. im going to take it back apart tomorrow and round the edges of the bracket and paint everything... the only thing i have left is the foot pedal.. i had to add a piece of steel to the back to push up on the master cylinder.
