Banshee rear axle

[Blastastic]

What exactly does it do if you swap a banshee rear axle in a blaster? does it widen it? if so how much? and is it a direct fit?

 

[DUALSTROKE]

What exactly does it do if you swap a banshee rear axle in a blaster? does it widen it? if so how much? and is it a direct fit?

A banshee axle will make it 1 3/4 inches longer per side so 3 1/2 inches total.You have an 03 blaster so It is a direct swap,if you had a 88-02 blaster then you would need a banshee brake hub.So go get a banshe axle and enjoy.Good luck.

 

[yb200]

A banshee axle will make it 1 3/4 inches longer per side so 3 1/2 inches total.You have an 03 blaster so It is a direct swap,if you had a 88-02 blaster then you would need a banshee brake hub.So go get a banshe axle and enjoy.Good luck.

couldnt of said it betterI:I

 

[teddyca]

So just to confirm guys even though it is clear as day, With my 02 Blaster just the rear axle will not work, I need the brake hub as well. Is there anything else I will need to make this a straight swap?

 

['blanshee'man]

Yes. I have this swap in my 01. You can use a banshee hub or an 03+ blaster hub like i did.

 

[yb200]

So just to confirm guys even though it is clear as day, With my 02 Blaster just the rear axle will not work, I need the brake hub as well. Is there anything else I will need to make this a straight swap?

just the hub and axle and youll be good, waiting for my shee axle to come in the mailI:I

 

[DUALSTROKE]

So just to confirm guys even though it is clear as day, With my 02 Blaster just the rear axle will not work, I need the brake hub as well. Is there anything else I will need to make this a straight swap?

All you need is the axle and shee brake hub.

 

[joshrabbitt14]

around how much would this cost?

 

[DUALSTROKE]

around how much would this cost?

should be able to get one for $100.Maybe cheaper if you are patient enough to wait for an ebay deal.

 

[Hankdiggity]

So what the deal guys. The blaster brake rotor and sprocket from the 88-02 models works with the banshee axle but the brake hub does not, and will the banshee brake hub attach to the blaster brake rotor. How about billet axle lock nuts made for the banshee axle. Will they work with the blaster with the banshee axlw conversion.
I know the question was made quite clear already, but just thought I would make an attempt to increase the uh ya.....

 

[jahrastapark]

dont pay out the ass for one, theyre cheap all the time