banshee into a blaster
- Thread starter blaster boy 05
- Start date
hahaha, anything is possible, all you got to do is know how to make it happen!! blaster frame will have to be reinforced.
Not without a hellofa lot of work........but anything is possible with enough work. The biggest issue would be the huge radiator and pipes.
actually a shee isnt much lighter than a blasty, i think around 50-75lbs, so once you add the radiator,bigger motor,extra pipe, and metal it would take to stretch/strengthen the frame, it would prably be just as heavy if not weigh more than a shee... it would be cool and fun but no faster than a stock shee
the worst part would be making that radiator look nice on the blasters slim fram pipes would be easy just run a out of frame pipe coming right by your feet
out of frame cpi drag pipes, and find your self a kawsaki mojave radiator, or a set of dirt bike radiators
would be so sick. but like others are saying, the pipes are going to be an issue as well as the radiator. not to mention the width of the engine compared to the blaster frame. you would be tight for space for carbs and filters as well as centering the main shaft sproket with the rear, could possibly be off and make it look goofy if you have to shift the motor to one side.
but thats the worst.
make it happen!
but thats the worst.
make it happen!
if you really wanted to do something creative, get an old RD200 a yamaha aircooled 2stroke twin. build that and stuff it in. since most blaster classes state 200cc AIRCOOLED motor, your legal, but you know have a motor that will rev to the moon and accelerate like mad
