Long story short...I got new ITP aluminum rims and Holeshot tires for my Blaster. I get them home and they dont fit. I measure and find out my Blaster has Banshee hubs....I order Blaster hubs and bingo the wheels fit.
Here comes my problem....while riding I notice the tires wobbling and stop and look and sure enough the hubs are loose. What happened is the blaster hubs go further in and the whole where the kotter pin goes in is to far up front so the nut loosens and the wheel wobbles.
My question is , would it be alright to use three big washers on each side to get the center hub bolt all the way tightened and be able to use the kotter pin correctly ?
Thanks in advance, Phil
Here comes my problem....while riding I notice the tires wobbling and stop and look and sure enough the hubs are loose. What happened is the blaster hubs go further in and the whole where the kotter pin goes in is to far up front so the nut loosens and the wheel wobbles.
My question is , would it be alright to use three big washers on each side to get the center hub bolt all the way tightened and be able to use the kotter pin correctly ?
Thanks in advance, Phil
