i have a 79 suzuki jr 50 2 stroke and im trying to get it to start but theres no plug boot so im wondering if theres anyway to make it start without haveing the plug boot?
anyway????????
- Thread starter 89blaster89
- Start date
i was just curious cause ive heard of people just wrapping the wire around where the boot would connect?
had a plug boot burn up, way out in the middle of nowhere, skinned the wire back, wrapped the wire around the plug end, then cut and slid a piece of the boot over it to hold it on
ran like sh*t spittin and sputtering the whole way home, but it made it !
you may get it to start, but thats prolly gonna be it, may not run well enuf to do any tuning ?
be sure to not trim too much off, or you'll end up needing a wire/coil instead of just a new boot
Yup, it should run OK, I once fitted a coil with a plug lead thet was 2 inches too short.
Pared back the insulation, lengthened the wire with some copper wire stripped from a loom and wrapped it around the terminal of the plug.
Take heed, it has to be at least 1 inch away from any ground.
Pared back the insulation, lengthened the wire with some copper wire stripped from a loom and wrapped it around the terminal of the plug.
Take heed, it has to be at least 1 inch away from any ground.
