Any one have a lower chain roller

[dnoftz]

I know this is not the right section for this but since Im a new guy here I cant put it in the right section. But any way

Any one have a lower chain roller they would like to trade a sticker for?
Thanks

 

[sicivicdude]

http://www.blasterforum.com/do-yourself-20/homemade-chain-roller-tensioner-39133/

Make your own! You need a little patience and a box cutter.

 

[dnoftz]

Cool thanks man.

http://www.blasterforum.com/do-yourself-20/homemade-chain-roller-tensioner-39133/

Make your own! You need a little patience and a box cutter.

 

[sicivicdude]

they cost about $3 a piece to make and work better than stock ones. Bronze bushings roll easier and don't tear up the studs sticking off the frame. Once you tear them up, just buy some more parts and go for it again!

 

[Blaaster]

I make mine from 3/8" nylon chopping boards used for food prep, I cut them out with a hole saw and use 2 at a time. Cost $2 for 50.

 

[shadow04]

do you need the bottom chain roller on the frame. i broke the bolt off inside and tried to drill it out and messed it up even more bc there was no room to drill