another wont start thread

[mud runner]

ok im trying to start the blaster and i cant get it started its getting a lil gas to the motor because the plug was a lil wet iv changed the plug but still wont start any ideas

 

[itstyler]

http://www.blasterforum.com/engine-13/troubleshooting-maintenance-guide-30347/

People really need to read before you ask. I have problems all the time working on blasters and i can tell you for sure every problem can be solved with the search feature.

 

[scotj77]

pull the plug and put it up against the motor with the wire connected to it. kick it and see if it sparks. make sure everything is in the on possition

 

[mud runner]

ok just checked the reeds there good and im gonna buy a new kickstarter gear it decided its not gonna work again and im tired of f*cking with it

 

[mud runner]

ond i did notice one thing my carb boot has a crack in it so i probably need to replace it

 

[Blaaster]

ond i did notice one thing my carb boot has a crack in it so i probably need to replace it

Your problem may be sloved!

 

[Awk08]

/\ x2
if it's sucking air thru that crack, it's not going to suck air thru the carb and across the jets to pick up fuel

 

[Blaaster]

Another candidate for the old leak tester to diagnose.

 

[mud runner]

its getting tested tomorrow because all of the gaskets riped so i used yamaha bond