So I was testing for any leaks and the psi started dropping very fast. I sprayed soapy water around every spot. I saw a sh*t load of bubbles coming from the top and bottom (not from the sides) between the reed cage and intake manifold. Other than that spot, everything looked good.
Possibility #1: The bolts
One of the bolts broke in half and I went to a local hardware store and got ones that are pretty much exact. They were 6X1 threads and same length but they didnt have the built in washers like the stock bolts.
Possibility #2: Gasket
There is no gasket in that area. I looked at some diagrams and it doesnt seem like it needs one. But I dont know, maybe I should apply some gasket maker and else.
Possibility #3: Over tightened bolts.
Possibility #4: I have no clue what I am talking and the other ones can be all wrong.
Can someone point me in the right direction, Thanks
Possibility #1: The bolts
One of the bolts broke in half and I went to a local hardware store and got ones that are pretty much exact. They were 6X1 threads and same length but they didnt have the built in washers like the stock bolts.
Possibility #2: Gasket
There is no gasket in that area. I looked at some diagrams and it doesnt seem like it needs one. But I dont know, maybe I should apply some gasket maker and else.
Possibility #3: Over tightened bolts.
Possibility #4: I have no clue what I am talking and the other ones can be all wrong.
Can someone point me in the right direction, Thanks