Air Filter To replace the airbox?

[Blasterboy46]

I took the airbox cover off my blaster yesterday and i noticed a good increase in torque. So i was wondering if i could get rid of the whole air box and get
a air filter to put right on the carb. Also would i have to change the jet if i do this. Im running a 230.

 

[Blasterdude27]

I took the airbox cover off my blaster yesterday and i noticed a good increase in torque. So i was wondering if i could get rid of the whole air box and get
a air filter to put right on the carb. Also would i have to change the jet if i do this. Im running a 230.

Yes. I do this with most quads and bikes I have. Get a clamp on uni there about &17.99, and cut out the air boxI:I You may want the up the jetting, try it with out jetting first, then if its running lean up a jet size of two.
What other mods do you have?

 

[ron89]

i wouldnt get a clamp on if you trail ride all it will take is 1 puddle and your sucking it up in your motor, if you race go for it, just jet it rich and work your way down.

 

[Blasterboy46]

I usually ride in the dry stuff(sand, Hard pack) i dont get out on trails too much. Dont they make the k&n filter covers water proof? I dont have any other mods yet still trying to make a plan on what im going to do without busting the bank.

 

[Blasterdude27]

like ron said, be careful if you trail ride, one puddle and your screwed. you can buy some outerweres(sp?) to help but you still need to be careful
Denniskirk and rockeymountain are both good places that sell cheap clamp on's
http://www.denniskirk.com/jsp/searc...tore=Main&sort=pricedesc&np=0&page=3&limit=50
http://www.rockymountainatvmc.com/p...avTitle=Filters&webCatId=27&prodFamilyId=6800

 

[hickskateboarder]

good cheap mod. just watch the dust and water. and make sure you jet up.

 

[Blasterboy46]

Is the k&n a noticable difference form the uni?

I probably will up the jets what do you guys reccomend? I will probably be getting vforce reeds and pipes later on too.