air box boot will not go on all the way

[88' blaster]

just as the title says. the boot no matter how hard i try will not go on all the way i can just get it on enough to make sure nothing goes into the intake

 

[4cfed]

sounds like my lt, i loosen the bolts holding the air box on tighten the boot, than tighten the air box back down

 

[88' blaster]

sounds like my lt, i loosen the bolts holding the air box on tighten the boot, than tighten the air box back down

tried that..........1515151515151515

 

[88' blaster]

Put some ky on it

ky?1515155151515515151515

 

[4cfed]

need astro glide for the intake boot.. ky only works for the grips lol


idk man.. if you get get it on and tight that it wont suck anything in dont worry about it

 

[88' blaster]

need astro glide for the intake boot.. ky only works for the grips lol


idk man.. if you get get it on and tight that it wont suck anything in dont worry about it

its just hang on by like lil of the intake on carb im just afraid it will come off

 

[4cfed]

can you move the carb towords it enough out of the reed boot with out riskin a leak there?

 

[88' blaster]

can you move the carb towords it enough out of the reed boot with out riskin a leak there?

tried that too 15151515151515151515151515

 

[4cfed]

than something isnt installed propperly simple as that

 

[Awk08]

stock carb, stock intake ???????
if so, definately sounds like it is too far into the intake side

 

[88' blaster]

stock carb, stock intake ???????
if so, definately sounds like it is too far into the intake side

yep stock.............................

 

[loh61546]

i have this problem with my sons blaster. What i do is install the carb into the intake first. tighten that down. then i put the air box boot on, dont leave it hooked on that little knob the the frame. if you unhook it from that it will give you like an extra 1/2 inch of play.

 

[scotj77]

are your back plastics mounted properly? can you post a pic?

 

[Awk08]

i have this problem with my sons blaster. What i do is install the carb into the intake first. tighten that down. then i put the air box boot on, dont leave it hooked on that little knob the the frame. if you unhook it from that it will give you like an extra 1/2 inch of play.

/\/\/\/\ thats it, now i remember having to do tha also

 

[88' blaster]

ok ill try that and will post a pic soon