Aftermarket Pipe question with DJ +6 kit

[yamahonda]

Hello all, quick question.


I have a high volume Dynoport pipe / silencer that wont Fit my Diamond J +6 inch A-arm widening kit, and i wanted to know, is that THE ONLY Right Bend pipe that wont Fit? Do any of you using the +6 inch diamond J widening kit have any right bend pipes that Fit with the Diamond J kit installed? Pipes such as LRD ,Ct,trinity etc?

This information is very important i was i thinking of purchasing this pipe in the link below As i DONT want to convert back to stock pipe/silencer because of a huge loss in power with all of my engine work(p&p,milled head etc).

YAMAHA BLASTER 200 LRD PIPE&SILENCER EXHAUST SYSTEM:eBay Motors (item 220441170427 end time Jul-23-09 23:32:01 PDT)


Thanks for your time.


-Travis

 

[yamahonda]

ttt,



Anyone have any input on this , please.



Thank you.

 

[mr_3_0_5]

that pipe sold.. idk about the dj wide kit sorry cant help.

 

[yamahonda]

I probably helped someone out by posting the link ;P


Well Even your pipe wouldn't work with the dj kit , as you can see on the right side of the bike, your pipe is directly in the way where a bracket would come out 3" from where the stock a-arms ride.

I guess i will just be forced to keep my options for a pipe/silencer with the stock bent not right bend types.

But i suppose i will just purchase a stock muffler as i already have a stock front pipe laying around and run it stock. Hopefully its not like.. Stupid slow heh.


--T

 

[specialized7]

sell me that dynoport

 

[CC&Fabb]

Get a Shearer pipe and dont worry about it....

 

['blanshee'man]

i had the same exact problem with my dynoport. i ended getting rid of the kit. but i can tell you that the lrd will not fit. And that i am pretty sure but not certain the f7 and all its aliases will fit, because of their bend. Hope it helps

 

[jbblaster]

i think a f7 will work because it dont come that close to the a-arms.

 

[djack12]

The LRD and the Dyno Port do not work because the expansion chamber is so large. All the other right bend pipes will work. F7, Power Pros, Trinity, ect.

 

[blasterfreek30]

batt modified his dynoport to work with the kit

 

[yamahonda]

Batt must have cut/welded the dynoport, because i installed the kit, then tried to align the dynoport, and it looks like even if you attempted to hammer it a bit it wouldn't even come close to clearing that a-arm extender bracket, and i didn't want to start messing with my expensive dynoport pipe, so i didn't try to get it to work.

 

[blasters/banshees]

get aftermarket a arms problem solved