aftermarket control arms ?

[1bad442]

they say +3+1 i know the plus 3 is width what is the plus 1?

 

[yzrider]

it i +1 inch forward, and +3 on each side bro

 

[brandoz28]

yup, it sets the wheels 1 inch farther forward than the stockers, helps to make up for the REALLY short blaster wheel base

 

[1bad442]

thanks for the info

 

[1bad442]

are these arms good?? ATV A-Arms

 

[brandoz28]

they're pretty popular on here and seem to be fairly good quality


if you're looking for top of the line, Burgard or Snyder Motorsports are where you want to look

 

[DirtDiggler]

I have the +3+1 long travel ams and if I could get some SMS +5's +1's I would and go 6" on the swinge and a adjustable width axle I'd be in blaster heaven

 

[3 Wh33l3r Rid3r]

yes they are a good set. if i was u man i would get some long travel arms and run some yfz450 shocks. the longer shock stroke is a little easier to tune

 

[1bad442]

yes they are a good set. if i was u man i would get some long travel arms and run some yfz450 shocks. the longer shock stroke is a little easier to tune

thats exactly what im doing as i allready bought a set of front and a rear yfz shock the rear shock should be ok as i have a +4 arm allready

 

[3 Wh33l3r Rid3r]

good deal should land like a dream

 

[1bad442]

the burgard arms have a stud and nut on the upper ball joint so will i need banshee spindles also??

 

[brandoz28]

no, and the ASR ones will as well IIRC

 

[1bad442]

ok but seeing as it has that style ball joint instead of teh nut and bolt pinch style i coudl just put a set of banshee spindles on correct?

 

[brandoz28]

if you want to do that, you'll have to get banshee spindles, as the shank on the blaster balljoint is larger

 

[3 Wh33l3r Rid3r]

im curious if u could get some different balljoints made to go in the arms to accept some yfz spindles where u could run a whole yfz brake system. i have snyder motorsports arms i wonder if i can get some balljoints made for mine too?! might be something u could ask the arm builder if they have some that will swap out

 

[1bad442]

im curious if u could get some different balljoints made to go in the arms to accept some yfz spindles where u could run a whole yfz brake system. i have snyder motorsports arms i wonder if i can get some balljoints made for mine too?! might be something u could ask the arm builder if they have some that will swap out

thats exactly what i was thinking as i have a whole yfz banshee style hydro setup im waiting to put on mine if they could put a yfz or banshee upper ball joint in teh arm that would really make things easy for me

 

[3 Wh33l3r Rid3r]

well let me know what u find out on it i may have to contact snyder to see if its possible for my arms too

 

[brandoz28]

you're going to need a set of banshee balljoints, or whatever you decide to use.


otherwise you could ream the banshee spindles to work with the blaster ball joints

 

[1bad442]

im gonna call burgard tommorow and se if the banshee ball joint will just screw in the upper as its just a 16 mm threaded heim joint

 

[brandoz28]

you're going to need lowers as well.