Aftermarket A arms?

[R3dtick]

Who still makes aftermarket A-arms for Blasters? The only ones I've been able to find are Albas and ASR. Also and this should probably be a separate thread, but can you use a banshee spindle with an aftermarket arm if you change from the blaster pinch bolt ball joint to a banshee ball joint.

 

[blasterbrian]

Yes and yes

 

[ky88blaster]

I bought the ASR +3+1 long travel arms and I used stock 400ex front shocks and its a pretty nice setup. then I replaced the heim joints with banshee/yfz balljoints from ASR and bought some yfz 450 spindles and going to get some yfz calipers too and have a good hydraulic brake setup.

I also bought a +2" roundhouse swingarm from "the swingarm shop" on ebay, and Im using a 400ex axle/carrier/rear brake and it all works and lines up perfect. and the roundhouse design to me is alot more reliable cause theres less chance for the chain to get out of alignment.

 

[blasterbrian]

How much wider is 400ex axle?