Advice needed

[ant_mb]

I'm pretty mechanical and can figure most things out, but tuning a 2 stroke on the bottom end eludes me. I've got the thing running sweet on the entire power band, but have a quick question on the return to idle part. I made a video of where it is currently at in hopes of that the 2 stroke gurus can tell me if I'm close. It runs great, but seems to studder for about a second before it returns to its steady idle. Is this normal?

YouTube - antmb's Channel

 

[brandoz28]

where's the idle screw set? turn it in a little at a time to see if it helps. if you have to go in much more than half a turn then you should go up a size on the pilot

 

[ant_mb]

So you think it's a little lean in idle? I have it at a low idle.

 

[blasterfreek30]

try messing with the airscrew adjustment....i think thats what brando meant lol

 

[brandoz28]

try messing with the airscrew adjustment....i think thats what brando meant lol

yup that's what i meant freek. the fact that it slowly comes back down to the idle makes me think it'll get better as you take the screw in