so i was just wondering what is a good piston to throw in my blaster when i do decide to do so.wisco?or is there a better maker?and i will have to bore it out a lil but not to much i hope.id like to keep my high rpms for top speed
a good piston
- Thread starter Antec1200X
- Start date
Does your bike need rebuilt? If so a wiseco is a really nice piston. and also only go one overbore size at a time, it adds no power and no notable cc's... all it does it wear out your cylinder.
take the top end to a shop and have them measure it and they will let you know what piston to get. then take the jug and piston to the shop and have them bore it and champfer he ports. champfering is rounding the edges of the ports so that the rings don't catch. the champfering is very important. all new gaskets and a leakdown test after assembly. only buy weisco.
well the motor needs to be rebuilt.i did have the jug off it one time and the piston rings pin broke off and scored the wall of the jug.but when i do get the cash i was planing on sending it to Mr ken oconnors and get him to port and bore it.
yeah it costs way to much where i live just for shop time.i can ship it to him and still afford a new piston.so wisco is the one to get?
don't buy a piston until it is measured by a shop. if you send it to ken he will order it for you. costs a few bucks extra but it is worth it to be sure you aren't buyin the wrong size piston
