A arm question?

[Blasterr]

Im hopefully getting a set of +2 a arms standard travel, one of the tie rods is bent. So can I buy stock tie rods and run it with the +2 a arms?

 

[York Racing]

All depends on the brand.

 

[Blasterr]

Partz pimps four plays

 

[Quadrider10]

probs not..... ur better off with aftermarket ones..... ebay is ur best friend....

 

[Blasterr]

Alright, I dont like the green but im gonna paint them anyway, but what are the ends of the a arms called? tht hook to the end of the a arm and the inside of the tires?

 

[Quadrider10]

Alright, I dont like the green but im gonna paint them anyway, but what are the ends of the a arms called? tht hook to the end of the a arm and the inside of the tires?

ball joints/ piviot joints.....


EDIT: Uhhh OHHHHH PARTZ PIMP in the house!

 

[Blasterr]

I prolly need new ones. There green ):

 

[Quadrider10]

I prolly need new ones. There green ):

as long as there moving freely without binding or with exsessive play in them, u shold be fine..... stock a arms u cant replace them to my knolage, <---- haha

 

[Blasterr]

okay what the diff in these bushings? YAMAHA BLASTER YFS200 URETHANE A ARM BUSHINGS12guarante | eBay and 12 Yamaha Banshee 350, Blaster 200 A-Arm Cap Seals By American Star | eBay

 

[Quadrider10]

okay what the diff in these bushings? YAMAHA BLASTER YFS200 URETHANE A ARM BUSHINGS12guarante | eBay and 12 Yamaha Banshee 350, Blaster 200 A-Arm Cap Seals By American Star | eBay

the first one is for a blaster, the second ones are for a banshee. u need the blaster ones....

opps my bad. the first ones are bushings, the second ones are just caps. if u need the bushings, get the first ones. if its the caps, second one.

 

[Blasterr]

Noo they say blaster too. i think one goes inside the a arm then the caps go on the outside?

 

[Quadrider10]

Noo they say blaster too. i think one goes inside the a arm then the caps go on the outside?

indeed.
if the a arms are wobbly and move back and forth a little, like mine. u need bushings, i would replace caps with new bushings, idk if u need the same ones. i would look for a kit.

 

[Blasterr]

I researched it all, I know how to replace the whole thing now thanks!

 

[Quadrider10]

I researched it all, I know how to replace the whole thing now thanks!

i dident do anything. u researched it on ur own! Good Job! have some green!

 

[Blasterr]

Thanks mann!!!!!!!!!!!!