Z
Zakman
Guest
need questions answered, like i have no compression, do i get a cylinder and piston or reeds or what, i dont know, cant afford to take in, what should i do first guys.
uh huh, do what blasterfreek said, and if i might add, you wouldn't regret buying a new set of reeds (preferably G3 or Vforce 3 reeds -- g3 being the higher end of those two) because the stock - oem - reeds are a glass-type material and they tend to crack the G3 and the Vforce 3 reeds are both Carbonfiber reeds
just pull the jug and see if it is scored at all. if not you only need new rings, but may want a new piston too. most people seem to like wiseco. you'll have to measure the bore unless you know whether or not it was bored before and what size it was bored out too.
Similar threads
