hey im about to buy a blaster which the kid said he put a 68mm vito piston in it how much power does this give and is it a good piston?
68mm piston
- Thread starter 2stroke4lif3
- Start date
dont get it, one becuase vitos pistons are cast and not good quality, 2 because 68mm is the last bore in the cylinder, so it will be junk after it blows
every time a cylinder is damaged due to seizing, water lock, overheating, etc, it usally needs bored out, meaning taking some of the cylinder wall away so it is smooth again, then u need a bigger piston to accomodate. 68mm is the furthest that the blaster cylinder can be bored, so if problems occur u are looking for a new cylinder
Actually you're info is wrong. 68mm is .080 over stock. You're able to bore it to .090 or 68.25mm.
wait!!! how much for blaster and more info on it
can always get another jug but use this info when you try buy it to get price lowered
Depends on all the info for quad
66.00 - STOCK - 195CC - 205CC
66.25 - .010 - 196CC - 207CC
66.50 - .020- 198CC- 208CC
66.75 - .030 - 199CC - 210CC
67.00 - .040- 201CC - 212CC
67.25 .050 - 202CC - 213CC
67.50 - .060 - 204CC- 215CC
67.75 - .070 - 205CC - 216CC
68.00 - .080- 207CC - 218CC
68.25 - .090- 209CC - 220CC
=========================================
72.00 - STOCK BB- 232CC - 244CC
72.25 - .010- 234CC- 246CC
72.50 - .020 - 235CC - 248CC
can always get another jug but use this info when you try buy it to get price lowered
Depends on all the info for quad
66.00 - STOCK - 195CC - 205CC
66.25 - .010 - 196CC - 207CC
66.50 - .020- 198CC- 208CC
66.75 - .030 - 199CC - 210CC
67.00 - .040- 201CC - 212CC
67.25 .050 - 202CC - 213CC
67.50 - .060 - 204CC- 215CC
67.75 - .070 - 205CC - 216CC
68.00 - .080- 207CC - 218CC
68.25 - .090- 209CC - 220CC
=========================================
72.00 - STOCK BB- 232CC - 244CC
72.25 - .010- 234CC- 246CC
72.50 - .020 - 235CC - 248CC
