500ex blaster

T

Tommyramone55

New Member
Jan 30, 2012
38
0
0
Alright guys you can see pics in the introduction area for now but I just bought a blaster with a 500ex motor in it from an 88 ninja it's currently not running and from the looks of it might need a bit of work I'm not sure, so thought I'd just make a thread hope nobody minds too much and please be patient on this build and a very hefty thank you for all the advice I'm sure I will get.

So when I bought it I was told it just needed a wire harness, so I got one just the wire harness ( kind of feel stupid thought feels like I would need a Cdi etc??? Just thought about that part when I got home well guys still has the "brain and other pieces he thinks I will need) anybody chime in there by chance? I ran across a link where someone says they are pretty simple to wire, but of course I lost it. Anyways that's it for now might get something going tonight just kind of depends. But yeah just thought it would be a fun ride if I get it going. Hopefully I can lol
 
Sorry guys still no super progress but I got the Cdi junction box and such today just trying to figure out the best way to run my harness. Tried tonight for a few but no results. If anyone has a diagram on simplest way to wire it that'd be hugeee help. Although not many people chimed in yet.
 
run it along the frame maybe? I haven't tried running a ninja harness along a blaster frame recently haha
 
Interresting swap
those engines are kind of big
Has the frame been lengthened any ??
How does the fuel tank fit ???

nuno
 
Tommyramone55 said:
Alright guys you can see pics in the introduction area for now but I just bought a blaster with a 500ex motor in it from an 88 ninja it's currently not running and from the looks of it might need a bit of work I'm not sure, so thought I'd just make a thread hope nobody minds too much and please be patient on this build and a very hefty thank you for all the advice I'm sure I will get.

So when I bought it I was told it just needed a wire harness, so I got one just the wire harness ( kind of feel stupid thought feels like I would need a Cdi etc??? Just thought about that part when I got home well guys still has the "brain and other pieces he thinks I will need) anybody chime in there by chance? I ran across a link where someone says they are pretty simple to wire, but of course I lost it. Anyways that's it for now might get something going tonight just kind of depends. But yeah just thought it would be a fun ride if I get it going. Hopefully I can lol
Click to expand...

88blaster on here was doing a ninja motor swap, toss him a pm!
 
Tommyramone55 said:
No answer from the pm yet lolbut frame I'll post pics after work....is going to be reworked though
Click to expand...


Ok sorry can't help you much about wireing
i'll bet you'l need a reg/rectifirer 3coil connections ,1 ground and 1 live(+)
and the cdi witch sould have like 6-7 wires high/low rpm trigger, switch and ground maybe kickstand sensor also
and 2 coils (+) and ground
starter relay (2 thin,ground and one thick wire to starter)
Everiting else sould be street stuff
Nuno
 
Yeah there's a lot of wires in the harness lol trying to do away with some but now I'm off work and have to do lawn, gay. Hopefully after that I can get into it for a few I'm missing a coil ATM but got a free one just gotta meet up with the guy at some point
 
that gave me a headache even looking at that, best of luck to you man! I will be watching for progress.
 
Motors even have same harness just got to fig out where it all goes Im about to look attheharnesone more time.

Just stripped the harness to wires lol
 
Last edited:
Well I'm at a full halt ended up getting the day off and have tried god what seems like everything still can't get the motor to even turnover and at this point it's all I want.

Is there any easy way to wire a bike lol I've been searching....but nothing. Just wish I could do starter to battery to button and be done.

Someone helppp!!!!
 
Tommyramone55 said:
Well I'm at a full halt ended up getting the day off and have tried god what seems like everything still can't get the motor to even turnover and at this point it's all I want.

Is there any easy way to wire a bike lol I've been searching....but nothing. Just wish I could do starter to battery to button and be done.

Someone helppp!!!!
Click to expand...

You should have a starter relay (botton center right on the diagram above)
it should have two bolts that connect two thick wires (red ) one from batt (+) to relay and one from relay to starter .
next connect the batt (-) to a good ground
The relay should also have two small spade connectors ? or a 2 pin plug ?
Connect one connector to ground and "TOUCH" the other one to the batt (+) it should now turn on the starter

Nuno
 
You must log in or register to reply here.

Similar threads

C
Stick to 240s BigBore
Replies
0
Views
217
Engine
chasejleveck
C
Blaster_boy200
A technical question about the choke?
Replies
2
Views
157
Carburetor
Blaster_boy200
Blaster_boy200
X
What Oil
Replies
1
Views
390
General Support
xColby3
X
Dragonslayer
Blaster idles, but revs up slowly in neutral and has no power in gear
Replies
1
Views
303
Engine
Dragonslayer
Dragonslayer
22omanmatt
03 yamaha blaster no spark!!
Replies
1
Views
816
Electrical
YZ Otis
YZ Otis
Top Bottom
Back