$50 to spend

[tyler1blaster]

i have 50$ to spend, what on my blaster could i get for 50 bucks? thanks not much money but it doesnt matter to me

 

[1997blaster]

i would see if you can find a front bumber or bars or a 250r or whatever rear shock

 

[blastermaster01]

yeah I was going to say bars of a front bumper

 

[tyler1blaster]

i would see if you can find a front bumber or bars or a 250r or whatever rear shock

mmk mmk thank 97, got the bumper but about the rear shock, is it like the 400ex where you have too mod it to make it fit? thanks

 

[yb200]

get a hooker..........................

 

[blastermaster01]

get a hooker..........................

lmao

or just save it up to get something better

 

[yb200]

donate it to me................

 

[tyler1blaster]

mmmmhmmmm yb lol my grandparents said 50$ is all they would spend and they wont just give me the plain cash.... so i think its all going towards my new nerfs

 

[1997blaster]

mmk mmk thank 97, got the bumper but about the rear shock, is it like the 400ex where you have too mod it to make it fit? thanks

i would get this one unless ur a bigger guy its easyer and a lil bit softer if ur smaller. Honda 250r shock again this is a amazing shock probably better than the 400 shocks you can go for the atc 250r shock or the trx 250r shock however early models shocks are a bit longer than the newer ones and will raise the back more i think it is pree 1986 that are longer you need to cut the 250r top shock sleeve to fit snugly between the bolt holes on the blaster. you can use your stock top bolt and your stock bottom pin cut the steel spacer to fit snugly between the bottom shock mount holes. http://www.blasterforum.com/do-yourself-20/86-250r-rear-shock-easy-fit-1635/

 

[Awk08]

you could get a "hot shot" cdi box, off ebay, supposed to advance the timing curve and let it rev higher, then you could let me know how ya like it, before i buy one, hahahaaaaa

 

[samolia]

you could get some boyseen power reeds for under $50

 

[tyler1blaster]

gettin air scoops

 

[bobdryerr]

nice................

 

[yzrider]

get a 400ex shock or a banshee axel and shorter valve stems for a wheel flip.