$50 pitbike

[Zwiser]

So I bought this today I dont know what it is (guy said it was a 125) its pretty beat must have been left out side or somthing but it runs for like 30 seconds then shuts off but still revs, probably a fuel problem, and also theres a chip in the case by the left foot peg, oil comes out of it but the hole is only like 10mm but for $50 what do you expect anybody have suggestions on how to fixs this?

 

[d.shook3]

jb weld will fix the hole haha

 

[Zwiser]

thats what the guy said to use ill get better pics tomarrow

 

[yzrider]

looks good, give it a fresh plug, a carb cleaning and see how it runs after that, adn don't forget fresh gas

 

[Braaaptor]

Yeah, clean the carb really well, and don't forget to take out the needle jet to get rid of all the crap built up in there. I'd also clean the fuel petcock and replace all fuel lines.

Nice score for $ 50.00! Change the oil, do the carb and tune-up, reset the valve lash, and go riding...

 

[Zwiser]

what kind of oil should i use? yamalube 10w-40

 

[Zwiser]

anybody got ideas on what kind it is?

 

[Drifz1]

i always used to put cheap 4t lawnmower oil into my old chinese stuff

 

[lasxgames]

easy to work on and mods are cheap

bigger carb, and cdi and bar risers.

pitbike parts items - Get great deals on Parts Accessories items on eBay Motors!

[QUOTE=lasxgames;280164]

Ymotokazie

[/QUOTE]
ouTube - bo pitbike hole shot (Sandbox) motocross indoor racing

 

[Zwiser]

are the parts all universal?

 

[Zwiser]

thats a nice one you have, i dont plan on racing just somthing f around on

 

[Braaaptor]

The Yamalube 10w-40 oil will be fine; as long as its made for ATV's and motorcycles, you'll be safe running it.

A lot of parts interchange between bikes; you just need to find out what size engine you've got and start modding from there. You may be able to see a mark stamped into the base of the jug with a displacement size in CC's...

 

[lasxgames]

mine a cheap one we moded and we still win on it lol

most parts are mix and match

 

[caseywoods5]

i bought my nephew a brand new bike for his birthday for about 600 and it was all honda replica. it is like a honda 50 frame and sh*t with a honda 70 motor except not honda. everything from the crf50/70 is interchangeable with it so any good a/m stuff for hondas i can get for his bike!

 

[Zwiser]

yeah i have to give it a good cleaning to be able to see any marks tryd looking for the serial # but couldnt find it for the bill of sale, how easy is it to use jb weld on a crack like this ill get pics tomarrow of the crack but its like the size of a shrapie felt tip

 

[caseywoods5]

^^^ shouldn't be too hard if it's not too big. by how you're explaining it it should be fairly easy.

 

[Zwiser]

found out its a "sunl" and i fix the crank case crack with jb weld no more oil leaks! still got to clean the carb hopefully tomarrow