+4 axle and douglas 190s for the rear and diamond j +6 up front.

[crusty4365]

front set up.
diamond j +6 set up
banshee front shocks
(any ideas for rims and tires?)

rear set up
lonestar axle or any other +4 axle i can find on ebay.
250R rear shock
douglas 190 rims or w e cuz they are +2 i hear so that will make the front and back the same width

is this a good set up?
will i bottom out alot on jumps?
if i got douglas 190 rims in the front would that make them +2 wide like they will in the rear?
is there shocks similar to banshee fronts but with resevuars??

 

[bundyho1]

if i got douglas 190 rims in the front would that make them +2 wide like they will in the rear?No but they do make a 2+3 offset and they will make it an inch wider on each side.

 

[suprex]

i WOULD NOT use banshee shocks with the widening kit.... the kit makes all shocks so soft... you need more beef.

and are you going to get the shock conversion kit too? because, beware if you do... blaster or banshee shocks will not fit it... you need long shocks, like 400ex or z400 or yfz450

 

[crusty4365]

yeah il just keep it simple and use stock shocks or maybe an aftermarket shock with a ressy

 

[fmxr47]

400 ex front shocks or yzf450 fronts arewhat you need, buy tge shock conversion kit w/ the widening

 

[suprex]

fmxr47 is right.... get the conversion kit with it and get some better shocks...

i use ltz400 and they are o.k... better than 400ex.. but still not that great.

i really want some yfz450 fronts. or 08' z400 fronts (they have rezzy)

 

[blasterfreek30]

guys you wont regret getting the yfz450 shocks they are perfect for a blaster, just have to tune them right,