I wanna put a 3mil in my blaster... what exactly do i need to do for it to be efficient cause i wanna keep stock bore and will ky 28mm keihin be good enough with my fatty
Yes you can use stock cylinderSo i can use a 3mil with stock bore( no bbk) and get port work done and be fine
With the crank and port work there will be a. Very noticeable power gain.are you rechambering the head also. It's cheap mod. Your carb will work.My builder called today i decided to get the 3 mil and get everything ported will my 28mm keihin be ok with proper jetting or will i need a bigger carb
Are you porting the 240?just the 240 alone without porting you won't get near the power you could out of it.I ended up letting him drop the 240 and 3mil in it
Sounds fun. Who's doing it?Ended up changing my mind again got ported done head work and a 3mil
Don't really know any numbers.your port and head mod are going to be different from the next person.its what your asz dyno says it is it should be a very noticeable difference over non ported cylinderTrynaLearn said:What is the ending hp result of trail port and 3mil