30MM OKO jetting

[motoman159]

i want to know what jets to order for this i know it takes keihin jets , let me know what sizes i should order, mods:

KOR racing trail port with boyesen ports, and rechambered head, wiseco piston, fmf sst pipe,
open airbox, vf3 reeds,crank assembled by KOR ( don't know if that matters)
and uni filter...

 

[Awk08]

http://www.blasterforum.com/searchresults.php?cx=partner-pub-9438014176008015%3A9127094460&cof=FORID%3A9&q=30MM+OKO+jetting+&sa=Search

 

[mmajay]

152,155,158 mains 42,45,48 pilot is a good starting point. If you have more cash you could get even more to be 100% sure.

 

[motoman159]

http://www.blasterforum.com/searchresults.php?cx=partner-pub-9438014176008015%3A9127094460&cof=FORID%3A9&q=30MM+OKO+jetting+&sa=Search

already tried.. there all on stock motors

 

[motoman159]

152,155,158 mains 42,45,48 pilot is a good starting point. If you have more cash you could get even more to be 100% sure.

thanks

 

[slickerthanyou]

Post #62-

http://www.blasterforum.com/jetting-139/jetting-numbers-solution-17259/index4.html

 

[motoman159]

It came with a 145 and a 42.. I wonder how that would be with the lid on..

 

[mmajay]

It came with a 145 and a 42.. I wonder how that would be with the lid on..

Way to lean with a 145. I wouldnt.

 

[slickerthanyou]

Way to lean with a 145. I wouldnt.

Agreed !

 

[motoman159]

Agreed !

K thanks I'm going to order those sizes

 

[scotj77]

my cousins blaster has a flotek port job with a bills pipe on a 30mm oko and he runs a 155, also has an alluminum airbox. just a tad rich