300 dollar YZ80!

[BlairGreen]

Bike is an 01, doesn't run but the bottom end is good and it turns over
Parts:
Full FMF
PR2 suspension (worth 3 times what I paid lol)
Renthal Bars
Lojacks Swingarm
Extras:
2 seats
stock forks
extra carb
extra front wheel
bunch of extra bolts and throttle cables, brake levers, etc

 

[bummer981]

Sounds like a great deal. What are your plans for it?

 

[dirtysquared]

Good Deal!

 

[BlairGreen]

Sounds like a great deal. What are your plans for it?

Take off the head today, see if it needs a bore and I'll go from there, but other than that I'm just gonna ride it over summer as a back up in case of a quick planned ride cause it's alot easier to fit the bike than my blaster lol and then I'll probably sell it for 1200 and get a 125 or 250f

 

[BlairGreen]

Good news haha top end is perfect besides the piston. Bad news bottom end is full of rust. I'm spraying wd40 with the bike upside down and it's getting most of it out. I've heard kerosene works as well anyone ever try?

 

[Blaaster]

Pelt that can of WD40 into the bushes!

If there is rust in the bottom end you can bet a Penny to a bit of doggie doo that the bearings are just full of it.

You need to split the cases and thoroughly clean/replace the bearings, there is no way that flushing with anything will get all the rust particles out!

 

[BlairGreen]

hey guys got it running crank bearings are fine