Hi guys,
Its been along time since I've checked in but I finally got a blaster again...and its along story so here we go. I rebuilt a blaster that i bought off my brother for $100 and it broke the top of the piston off so it sat out back for awhile then a blaster with full FMF,skid plates,nerf bars and nice wheels but no motor showed up on CL for $200 so I bought it and bought a $100 bottom end for it and put a new top end on it and a couple hours into riding the piston basically decengrated in the cylinder and pounded the rings into the piston becuase the cylinder wasn't honed. So after that it sat out back again and I traded a project truck for a 02 raptor 660r big bore,hmf,all kinds of fancy stuff and i rode it for awhile but it was just too much bike for my kinda riding and it was developing problems so I traded it for a blaster with new clutch and basket,carb,and supposed big bore,older FMF exhaust and it started first kick and was a nice 4 wheeler but I took its motor and put it on my blaster with the skid plates,new FMF and nice wheels and plastic. I don't know if any of that made sence but its good to be back and here's some pictures.....got a kid on the way but hopefully upgrades to come soon!
The orignal $100 blaster bought from my brother
(Before)
(Now)
The raptor i traded for the donor blaster
The donor blaster after i robbed the motor and other small stuff
My blaster junkyard
The $200 CL blaster that after combining 2 other blasters finally became my favorite toy!
The motor off of the red/black one that i'm starting to re-paint.
Opened up the clutch side cover to fix a oil leak and screwy kick starter and filled it full of the oil on the right. Any one used it before?
Whatcha y'all think?.....hopefully more to come!!
Its been along time since I've checked in but I finally got a blaster again...and its along story so here we go. I rebuilt a blaster that i bought off my brother for $100 and it broke the top of the piston off so it sat out back for awhile then a blaster with full FMF,skid plates,nerf bars and nice wheels but no motor showed up on CL for $200 so I bought it and bought a $100 bottom end for it and put a new top end on it and a couple hours into riding the piston basically decengrated in the cylinder and pounded the rings into the piston becuase the cylinder wasn't honed. So after that it sat out back again and I traded a project truck for a 02 raptor 660r big bore,hmf,all kinds of fancy stuff and i rode it for awhile but it was just too much bike for my kinda riding and it was developing problems so I traded it for a blaster with new clutch and basket,carb,and supposed big bore,older FMF exhaust and it started first kick and was a nice 4 wheeler but I took its motor and put it on my blaster with the skid plates,new FMF and nice wheels and plastic. I don't know if any of that made sence but its good to be back and here's some pictures.....got a kid on the way but hopefully upgrades to come soon!
The orignal $100 blaster bought from my brother
(Before)
(Now)
The raptor i traded for the donor blaster
The donor blaster after i robbed the motor and other small stuff
My blaster junkyard
The $200 CL blaster that after combining 2 other blasters finally became my favorite toy!
The motor off of the red/black one that i'm starting to re-paint.
Opened up the clutch side cover to fix a oil leak and screwy kick starter and filled it full of the oil on the right. Any one used it before?
Whatcha y'all think?.....hopefully more to come!!
but i live in ozark just a few miles from chadwick...right down the road from my house is the back way into chadwick.
