2stroke moped help ! PLEASE !

Xero

Member
Jan 8, 2012
415
4
49
28
England, UK.
Ok so most of you know I bought my Yamaha aerox moped the green tuned one.. well it was running awesome until the crank seals blew.. I mentioned this a while back and a few of you tried to help me figure out what was wrong, while trying to figure it out my dads friends played about with the air mixture, then when we found out it was the seals we changed them and ever since it wont run "right" it runs good and quick but it just doesnt like setting off and splutters oftenly, where as before it was hard to set off without wheelieing.. I would of thought the jetting but since it ran fine before I dont really know what it would be.. Any ideas? its really depressing me now i dont like spending all that money for something that doesnt run as it should! :(
 
well it could be a jetting issue if someone had tried to jet it with an airleak at the crank seals. did ya do a leakdown after replacing the crank seals?
 
It wa jetted when it was built and hasnt been changed since so i cant see it being the jetting at all, and nope i have no form of tester for it, i think its a carb issue to behonest but not 100% sure
 
well if it had an airleak that just progressivly got worse at the crank seal it could be jetting. I would clean the carb really well. change nothing just clean it. build a leakdown tester. use the same principals applied to building a blaster leakdown tester just build it to the size you need to fit the moped. you will never solve any problem to do with jetting and air fuel mixture with an airleak. NEVER!