274cc Yamaha Blaster Race Engine ... Come on, come on... bullsh&t...

[joeak47]

Where do people come up with this crap???
\/ \/ \/ \/ \/ \/ \/ \/ \/

http://www.ebay.com/itm/Yamaha-Blas...ash=item3f57b9722a:g:uyUAAOSwAKxWU2O5&vxp=mtr

Ebay item number 272054710826

Here's what it says...

SCARY FAST fully built Great running Race motor out of a 2005 Yamaha Blaster 2-Stroke

I have been told by previous owner that the motor has a 274cc/ .80 over Bore with just under two hours on the build. I have not pulled the cylinder on this motor personally, but the previous owner owns a very reputable cycle shop locally.

Motor has Tons of compression and runs amazing. Will SMOKE a stock blaster!! Transmission grabs well and shifts smoothly

It has a V-Force3 reed block already installed

This purchase includes EVERYTHING you need to make the Engine run, including ALL electronics, EXCEPT FOR CARB AND EXHAUST.


The quad came with a Fully built and Jetted Oversized Race carb as well as a FULL B1 exhaust. However these items will not come with this purchase. Please view my other items listed to see the extras.

I wonder what shop it is?

 

[Awk08]

c'mon Joe, you can clearly see that's the special yamaha blue edition race engine !

 

[Awk08]

well, a big thanx is in order Joe,
I looked at his other auctions and just could not pass up this roundhouse swinger for $105 shipped

http://www.ebay.com/itm/Yamaha-Blas...718740?hash=item3f57b99114:g:sNkAAOSwHQ9WU2ah

thanx for pointing me in that direction

this dudes nuttier than a fruitcake, 247cc engine for $800 and roundhouse swinger for $100, LOL

he's also got a good deal on a PWK 35 or 36mm carb w/ blaster cable and throttle for $85.
http://www.ebay.com/itm/Yamaha-Blas...cef2d3&pid=100037&rk=1&rkt=20&sd=272054718740

 

[joeak47]

WOW! You did good!
I was like...."A .080 over bore gives you 274cc's ???".... WOW! Amazing!

 

[dirtysquared]

That was a smoking deal for that swinger.

This dude clearly drank some bong water at some point in his life!

 

[79 bronco]

Hahaha 274cc with a .80 over Bore ! lol

Great price for the roundhouse!

 

[Herpderplol]

That was a smoking deal for that swinger.

This dude clearly drank some bong water at some point in his life!

I worked with a guy that did that for $20 when he was drunk. Water was a month old lmao

 

[Blaaster]

Well he nearly got it correct, a stock bore is 195cc, bored 80 over, gives a total of, ummm just let me work that out.....275 cc, the guy that told him it was a 274 was only one cc out. Lol.

 

[OConnor Racing]

It's missing one of the back cylinder nuts.

 

[Blaaster]

It's missing one of the back cylinder nuts.

That is to provide an air leak to complement the fully built and jetted oversized race carb.

 

[MURPH]

Where do people come up with this crap???
\/ \/ \/ \/ \/ \/ \/ \/ \/

i would like to know where they come up with this stuff too, the last 2 blaster owners i met on the trail said they have a 280 big bore motor ... and they weren't young kids either

 

[OConnor Racing]

Yamaha once built a 660 Blaster. They just called it a Raptor.

 

[79 bronco]

Funny stuff!

 

[pudvah]

I mean 207cc 274cc what's the difference it looks fast brap brap.

 

[Gambl31984]

Where can I get one????????

 

[Larry's Shee]

Where can I get one????????

Read the whole post before you ask