So wondering is their a way to remove the rivets from a 250r silencer in order to open it up or replace the end cap or is it just unable to be re-packed/opened ...
if its just a regular rivet just drill the head of the rivet and it will fall out the cap should come and you repack then just rivet it back on. If you dont have a rivet gun there are there are hand ones that are like 5$
my lrd and f7 blaster silencers were both riveted on, use the correct size bit, to only drill the center of the rivet out and as stated above it should just fall out, then replace with the same size rivet, or i used short self tapping screws, slightly bigger than the rivet hole, so they can be removed for the next repack
lot easier than I thought ... just drilled em out .. the whole thing pulls out easy and replacing with self tapping screws for future re-packing needs
lot easier than I thought ... just drilled em out .. the whole thing pulls out easy and replacing with self tapping screws for future re-packing needs
Well done, go to the top of the class.I:I
Yea I know ... I amaze myself with some of the stupid sh*t I ask but hell better safe than sorry