2006 blaster (upgrading before summer) pic set 1
- Thread starter lasxgames
- Start date
Read round house swinger +3 with long travel shock front is areadly long travel, Keep snapping bearing bolts.
man, i guess RHR is huge, lol. Went there for an RC race, but didnt kno that they used it for MX as well, haha. What pipe u running on that thing?
Thanks allot Also build new race motor to keep upd with the 350 raptors in the class, but only allows for 200cc 2 strokes, so porting shaved head jetting and gearing and we pull the hole shots, new moter will be even better.
do a wild mx port, shave the head, you probably wanna run premium fuel.
Upgrade the carb smallest airstryker you can find.
or a 30mm pwk
v force 3 reeds
Shearer is a good pipe for mid range pull.
im really not to sure about gearing for mx
That will get you the holeshot er' time!
Upgrade the carb smallest airstryker you can find.
or a 30mm pwk
v force 3 reeds
Shearer is a good pipe for mid range pull.
im really not to sure about gearing for mx
That will get you the holeshot er' time!
Thanks for the info We currently have a 30mm carb, bosen reed vavle, and the comp is just under 160, 110 race fuel.
race open age and 350's and Girls 400's and 450's
hole shots Sandbox Wis
another hole shots Sandbox Wis
races open age and 35o's and Girls 400's and 450's
http://www.sponsorhouse.com/Members/lasxgames
Last edited by a moderator:
if you dont mind running race gas, you can make a lot of power with the right head design and port work.
need to revavle shocks, setup for 160 lb rider and need to be 100lb rider last season could not double some of the double doubles but did pull 1st for the season.
