Hi Guys!
Just went to put on some new pads on the rear of my Blaster but I am running into an alignment issue. is there any way to adjust the left right setting on these calipers?
When I take out the old pads, push in the piston as far in as it goes, put the new pads on I am 1/4" too far to the right (looking from the rear).
At first I thought it was the pads themselves so I ordered a different set from a better manufacturer, however that's not the issue as they are both the same thickness.
I have the parking brake and assembly removes and a block off plate installed (still have the same issued with the original parking brake hardware on the caliper).
I checked the service manual and didn't see anything about this... I feel like I am missing something I just can't figure out what!!!
Thanks for the help!!
(I currently have some spacers mounted so I can move it around easily.. However I want to have this fixed the right way for my next ride)
Just went to put on some new pads on the rear of my Blaster but I am running into an alignment issue. is there any way to adjust the left right setting on these calipers?
When I take out the old pads, push in the piston as far in as it goes, put the new pads on I am 1/4" too far to the right (looking from the rear).
At first I thought it was the pads themselves so I ordered a different set from a better manufacturer, however that's not the issue as they are both the same thickness.
I have the parking brake and assembly removes and a block off plate installed (still have the same issued with the original parking brake hardware on the caliper).
I checked the service manual and didn't see anything about this... I feel like I am missing something I just can't figure out what!!!
Thanks for the help!!
(I currently have some spacers mounted so I can move it around easily.. However I want to have this fixed the right way for my next ride)