2000 blaster needs bore pistion and misc bolts

[tuneingfork46]

just grabed a 2000 blaster for 200$ has a banshee axle "need spoket" a bore and the pistion was missing lol it was sitting in a shed for a year i also need tires it has a fmf slincer an stock pipe no air fliter or grab bar but all plastics are in good shape no cracks or anything... wondering if any one had a certen brand of pistion in mind ??wesco?? is what i always used to use when i raced 125cc dirt bikes ....

let me know what u's think

 

[Longview]

Yeah, A nice Wiseco piston is what you will want when you rebuild that.

 

[dksix]

There has been a few piston thread in the last couple of weeks. General consensus is Wiseco with a few exceptions when one of the cheaper cast pistons would be good. Blaster's have a weak piston skirt design and forged piston should be stronger. Also, always do a leak down test before and after engine work, do plug chops to get your jetting right and break in you engine doing a 3 heat cycle routine. And that's just the stuff I've learn in the last few days, lol. In all seriousness, if you want to know about Blasters you have came to the right place. And you're getting off on the right foot, posted pictures with your first post. Welcome to the site.

 

[Longview]

Also, Stock pipes, and The FMF Powercore2 ( Is what i assume what FMF silencer you have ) are not meant to run together. So i would suggest getting a new FMF pipe as well.

 

[doodleaddict]

looks pretty clean atleast. you could always not bore the stock cylinder and get a 240 kit ))

 

[tuneingfork46]

looks pretty clean atleast. you could always not bore the stock cylinder and get a 240 kit ))

lol 500 is a bit crazy for me lol... i am going to do .30 over fmf pipe 400ex rear shock "i weight 189" boyson red cage twin air filter nerfs front bumper and some other small stuff trying to make a trail riding quad =)

 

[doodleaddict]

I'm about 170 and my blaster rear isn't bad but with what I have read on here the 400 shock is the bees knees his legs and his arms gonna be sick when you get it going

 

[tuneingfork46]

Update polished the fmf and the stock pipe .. cyl in being honed .30 over at a race shop should have it back tomorrow also got a polish and light port

 

[Longview]

Update polished the fmf and the stock pipe .. cyl in being honed .30 over at a race shop should have it back tomorrow also got a polish and light port

I don't know if you saw my post about the stock pipe running with the Powercore2?

 

[tuneingfork46]

I don't know if you saw my post about the stock pipe running with the Powercore2?

Ya I did but I have no choise till like June 30th so I thought I would make it look nice then I am going.to sell it and get a new one .... What will it do if i run it like that I grabed a jet up kit I am going to run it with no air box lid and the pipe and stuff I just need to get it running before I really dump money into it

 

[Longview]

Ya I did but I have no choise till like June 30th so I thought I would make it look nice then I am going.to sell it and get a new one .... What will it do if i run it like that I grabed a jet up kit I am going to run it with no air box lid and the pipe and stuff I just need to get it running before I really dump money into it

I honestly don't know, The guy who re-did my top end said the Blasters aren't meant to run that way. I'm sure someone on here would be able to tell you what actually happens.

 

[tuneingfork46]

I honestly don't know, The guy who re-did my top end said the Blasters aren't meant to run that way. I'm sure someone on here would be able to tell you what actually happens.

thank u for the input =) .. i dont know if you know.. but people are telling me to "chop" my spark plug to lower it into the cylender head for better spark .. have you ever head of this? also do u know any good front shocks that will pritty much fit well ? also i was told i have a banshee axle so would i have banshe hubs? if so what rims/tire do i need i have 8x8 rims that fit ... they are rusty but ... there rims

 

[tuneingfork46]

well as of now i have the frame sanded an readdy for paint ... i was thinking red frame blue swing arm and blue a arms ... does any one have and stock a arms for sale ? looking to cut an mod them 2 inches pm me