2 stroke oil for a powervalved motor

[blaster99]

ok so ive heard lots of preferred oils,but down to it which oil do you think is best for my powervalved motor,builders could help me maybe

 

[2strokepower]

Honda HP2 FTW!!!!!!!!!!!!!!!!!!

 

[blaster99]

im using that already lol

 

[2strokepower]

im using that already lol

Then your set lol

 

[blaster99]

truthfully it felt like it robed some power compared the bel ray s2

 

[4cfed]

pro honda hp2 FTW

 

[blaster99]

yea dude it made my bike run funny tho

 

[4cfed]

both my cr125s and my cr250 ran great on it.. its designed FOR the cr's

 

[blaster99]

maybe i should try 36 or 40;1

 

[atvmxr]

belray MC-1 or HR-1,
maxima 927

pretty much anything will work that is synthetic or semi synthetic. just no BS oil for chainsaws or what have you or bean oil..

 

[blaster99]

im gunna try a variety ,so far eblieve it or not the valvoline two cycle oil rant the best

 

[4cfed]

like i said the hp2 is for 32:1 and made for the cr bikes... you want a clean burn low deposit oil, to minimis the power port maintance

 

[2strokepower]

i have too run my bike 40:1 or it will foul the plugs in 15 minutes. 40:1 works great for me!

 

[blaster99]

yea i run 32:1 im gunna try 40:1 and see

 

[samolia]

yea i run 32:1 im gunna try 40:1 and see

make sure you check your jetting after you switch

 

[fioz600r]

I run Belray MC-1 in my 2000 CR250 and it works great. I run 32:1 also with Sunoco Ultra.
I tried some Klotz in it and I kept fouling plugs.
I also tried Amsoil (cant remember the name) but it said to run at 100:1! I would never run anything at 100:1. I tried it at 50:1 and 70:1 and still didnt run clean. So I swithed to the MC-1 and never looked back.

 

[YZ Otis]

belray MC-1 or HR-1,
maxima 927

pretty much anything will work that is synthetic or semi synthetic. just no BS oil for chainsaws or what have you or bean oil..

Hey! I use bean oil (benol)... LOL Ain't sayin it's good, Ain't sayin it's bad. Just smokin up the neighborhood when I purge

 

[2strokepower]

make sure you check your jetting after you switch

cr's come very rich from the factory so he should be fine.

 

[blaster99]

jetting is fine,but idk y its like been actin funny lately,i thinks its time for a new plug and some fresh gass